Restrictions must be followed when setting Conditions within a Rule.
| Condition | Restriction |
| Outage |
Do not combine other Conditions with the Outage Condition within the same Rule. |
| Change Detection |
Do not combine other Conditions with the Change Detection Condition within the same Rule. |
| Traffic Flow | Traffic Flow can be combined with Time Period Restriction and Protocol Restriction within the same Rule. |
| All Conditions | Duplicates of the same Condition are not allowed within the same Rule. |
The following Conditions can be combined within the same Rule:
- IP restriction
- Port Restriction
- Protocol Restriction
- Time Period Restriction
- Burst Detection
Important! Duplicates of the same Condition within a Rule are not allowed.
Related articles
- Creating a Rule and why a Rule is needed
- Monitoring your device for loss of connectivity (Outage Detection)
- Monitoring your device for unexpected data usage (Burst Detection)
- Monitoring your device for inbound or outbound traffic (Traffic Flow)
- Monitoring the location of your Device (Change Detection)
- Receiving alerts about traffic flow between your devices and specific IP addresses (IP Restriction)
- Receiving alerts about traffic flow between your device and specific Protocols (Protocol Restriction)
- Receiving alerts about traffic flow between your devices and specific Ports (Port Restriction)
- Receiving alerts about your Device’s usage outside of specified times and days of the week (Time Period Restriction)